Open up the intake side of your BMW F87 M2 with this Performance Turbo Inlet Pipe — an aluminium replacement for the restrictive factory inlet between the airbox and the turbocharger.
The standard N55 turbo inlet is a moulded plastic part with a stepped internal profile and a pronounced restriction where it meets the compressor housing. It is sized for the standard turbo and for noise, and it becomes a genuine limit the moment boost goes up. Opening it lets the compressor draw freely, which shows up as faster spool and a turbo that is working less hard for the same boost.
Mandrel-bent aluminium with a wrinkle black finish, supplied with a reinforced silicone coupler and two stainless T-bolt clamps.
Key Features:
Smooth Large-Bore Aluminium
A clean, consistent path into the compressor in place of the factory stepped plastic elbow.
Removes the Inlet Restriction
The standard inlet necks down before the turbo. This does not, so the compressor is not fighting for air.
Wrinkle Black Finish
A textured powder coat that handles engine bay heat and holds its look.
Reinforced Silicone Coupler
Multi-ply silicone with two stainless T-bolt clamps included.
Direct Bolt-On Fitment
Uses the factory airbox and turbo connections. No cutting and no fabrication.
Pairs With an Intake
Works alongside the factory airbox or an aftermarket intake, and is the natural next step after one.
Performance Benefits:
Faster turbo spool and sharper throttle response
Less restriction ahead of the compressor, so less work for the same boost
A more present induction note under load
Supports a Stage 2 tune properly rather than choking it
Aluminium construction in place of heat-cycled plastic
Vehicle Fitment:
BMW F87 M2 (2016-2018)
3.0L Turbocharged N55 Engine
N55 Only - Not the M2 Competition:
This inlet is for the N55 M2. The M2 Competition runs the twin-turbo S55 and needs a pair of inlets, not one — see our F80/F82/F87 (S55) turbo inlet kit.
Please Note:
Professional installation is recommended. An ECU tune is recommended to realise the full benefit.
Why Choose Proven Performance Parts:
We specialise in high-performance parts for European vehicles — Volkswagen GTI & R models, Audi S/RS platforms, BMW M cars and Mercedes-AMG. Every product we offer is carefully selected for its quality, fitment, and real-world performance — tested by enthusiasts, for enthusiasts.
WORKSHOP INSTALL AVAILABLE
Bring your car to our Brisbane workshop — open Monday to Sunday, 12pm–9pm. We fit what we sell.
FITMENT GUARANTEED
Every order is checked against your exact chassis before it ships.
PACKAGE PROTECTION
Tracked door to door and covered in transit. Damaged or missing? Contact us within 5 days.
EXPERT SUPPORT
Real answers from people who build these cars. We reply Monday to Sunday, 9am–8pm AEST.
TRUSTED BY THE BEST
From the workshop
-
Electric BMW M3 (2027): 1,000hp Quad Motors and the S58 Future
BMW's M Concept Neue Klasse previews the 2027 electric M3 - quad motors, 800V and over 100kWh. Here is what...
-
The Ultimate Guide to BMW B58 Performance Upgrades (2026)
BMW B58 Performance Upgrades: Why This Engine Has Become a Modern Legend When BMW introduced the B58 turbocharged inline-six engine,...
-
Volkswagen Stage X Package — The Ultimate 580HP MK7/MK7.5 GTI & Golf R Performance Build
Volkswagen Stage X Package — The Ultimate MK7/MK7.5 GTI & Golf R Performance Build The Volkswagen MQB platform has become...







