{"title":"B9\/B9.5 RS4\/RS5 Accessories","description":"\u003cp\u003eThe twin turbo V6 RS4 Avant and RS5 are Audi Sport at its most understated, which is exactly why carbon detailing works so well on them.\u003c\/p\u003e\n\u003cp\u003eAt Proven Performance Parts, our B9 and B9.5 accessory range covers carbon fibre front lips and splitters, side skirts, rear diffusers, boot and roof spoilers, mirror caps, grilles and vents, bonnet and fender detailing, and interior trim including steering wheels, paddle shifters and console panels. Every part is selected for fitment, finish and the way it works with the rest of the range, so a build comes together as one package rather than a collection of unrelated pieces.\u003c\/p\u003e\n\u003cp\u003eCovers the Audi RS4 Avant and RS5 Coupe and Sportback in B9 (2017-2019) and facelifted B9.5 (2020 onwards) form. Coupe and Sportback rear parts are not interchangeable.\u003c\/p\u003e\n\u003cp\u003eBuild with confidence and finish your B9 properly.\u003c\/p\u003e","products":[{"product_id":"audi-b9-b9-5-rs5-carbon-fibre-rear-trunk-spoiler","title":"Audi B9\/B9.5, RS5 Carbon Fibre Rear Trunk Spoiler","description":"\u003ch2\u003eAudi B9\/B9.5, RS5 Carbon Fibre Rear Trunk Spoiler\u003c\/h2\u003e\r\n\n\u003cp\u003eFinish the rear of your RS5 Coupe with this Carbon Fibre Rear Trunk Spoiler, a full-width ducktail that follows the boot lid line and turns up sharply at each corner.\u003c\/p\u003e\r\n\n\u003cp\u003eManufactured from carbon fibre with a high-gloss twill finish, the spoiler is a single moulding shaped to the contour of the B9 boot lid. The raised centre section and swept outer tips give the rear far more presence than the standard lip without moving to a full wing.\u003c\/p\u003e\r\n\n\u003cp\u003eIt suits an owner after the most effective single change to the back of the car, and it fits both the pre-facelift B9 and the facelifted B9.5.\u003c\/p\u003e\r\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\r\n\n\u003ch3\u003eDry Carbon Fibre Construction\u003c\/h3\u003e\n\u003cp\u003eManufactured using a dry carbon process, chosen for its rigidity and the depth of its finish under direct light.\u003c\/p\u003e\r\n\n\u003ch3\u003eFull Width Ducktail Profile\u003c\/h3\u003e\n\u003cp\u003eA raised centre section with swept outer tips, following the boot lid line across its full width.\u003c\/p\u003e\r\n\n\u003ch3\u003eDirect Boot Lid Fitment\u003c\/h3\u003e\n\u003cp\u003eShaped to the contour of the B9 boot lid so it sits flush without packing or trimming.\u003c\/p\u003e\r\n\n\u003ch3\u003eCovers Both Generations\u003c\/h3\u003e\n\u003cp\u003eThe boot lid carried over unchanged at the facelift, so one part fits the B9 and the B9.5.\u003c\/p\u003e\r\n\n\u003ch3\u003eHigh Gloss Twill Finish\u003c\/h3\u003e\n\u003cp\u003eA clear gloss finish over a consistent twill weave, matched to the look of factory Audi Sport carbon components.\u003c\/p\u003e\r\n\n\u003ch2\u003ePerformance Benefits\u003c\/h2\u003e\r\n\n\u003ch3\u003eTransformed Rear Profile\u003c\/h3\u003e\n\u003cp\u003eChanges the silhouette of the car from behind, the single most visible change available at the rear.\u003c\/p\u003e\r\n\n\u003ch3\u003eImproved Aerodynamic Profile\u003c\/h3\u003e\n\u003cp\u003eDesigned to complement the aerodynamic profile of the car and help manage airflow around it.\u003c\/p\u003e\r\n\n\u003ch3\u003eLightweight Exterior Upgrade\u003c\/h3\u003e\n\u003cp\u003eCarbon fibre construction keeps the added mass minimal.\u003c\/p\u003e\r\n\n\u003ch3\u003eCompletes Your Carbon Fibre Build\u003c\/h3\u003e\n\u003cp\u003eMatches the weave and finish of the rest of the Proven Performance Parts Audi carbon range for a consistent exterior package.\u003c\/p\u003e\r\n\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\r\n\u003cp\u003eAudi B9 RS5 Coupe (2017–2019)\u003c\/p\u003e\r\n\u003cp\u003eAudi B9.5 RS5 Coupe (2020+)\u003c\/p\u003e\r\n\u003cp\u003eDesigned for the two-door Coupe boot lid. The Sportback uses a different tailgate and is not covered.\u003c\/p\u003e\r\n\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\n\r\n\u003cp\u003eProfessional installation is strongly recommended.\u003c\/p\u003e\r\n\n\u003cp\u003eFitted using automotive-grade adhesive tape to the boot lid. Surface preparation is essential.\u003c\/p\u003e\r\n\n\u003cp\u003eMinor preparation, alignment or adjustment may be required during installation to achieve optimal fitment.\u003c\/p\u003e\r\n\n\u003cp\u003eDue to the nature of carbon-fibre manufacturing, slight variations in weave pattern may occur between products.\u003c\/p\u003e\r\n\n\u003ch2\u003eWhy Choose Proven Performance Parts\u003c\/h2\u003e\n\r\n\u003cp\u003eWe specialise in high-performance parts for European vehicles — including Volkswagen GTI \u0026amp; R models, Audi S\/RS platforms, and BMW M vehicles. Every product we offer is carefully selected for its quality, fitment, and real-world performance — tested by enthusiasts, for enthusiasts.\u003c\/p\u003e\r\n\r\n","brand":"Proven Performance Parts","offers":[{"title":"Audi B9 RS5 Coupe (2017-2019)","offer_id":52785737859354,"sku":null,"price":465.0,"currency_code":"AUD","in_stock":true},{"title":"Audi B9.5 RS5 Coupe (2020+)","offer_id":52785737924890,"sku":null,"price":465.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/1177\/4490\/files\/01_c6897aed-3919-46fb-b9c9-ae6804c00c6f.png?v=1788506396"},{"product_id":"audi-b9-5-rs5-carbon-fibre-ae-style-rear-diffuser-with-led-light","title":"Audi B9.5, RS5 Carbon Fibre AE Style Rear Diffuser With LED Light","description":"\u003ch2\u003eAudi B9.5, RS5 Carbon Fibre AE Style Rear Diffuser With LED Light\u003c\/h2\u003e\r\n\n\u003cp\u003eRebuild the rear of your RS5 with the AE Style Carbon Fibre Rear Diffuser, a multi-piece assembly with deep vertical strakes, wrap-around exhaust surrounds and an integrated LED element in the centre.\u003c\/p\u003e\r\n\n\u003cp\u003eThe kit comprises the main diffuser body plus a pair of carbon side blades that extend the treatment out to the rear quarters. Manufactured from carbon fibre with a high-gloss twill finish, it replaces the factory valance rather than sitting over it, so there is no added depth or visible edge.\u003c\/p\u003e\r\n\n\u003cp\u003eIt is the most aggressive rear treatment available for the B9.5 and the natural pairing for a carbon front lip and side skirts.\u003c\/p\u003e\r\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\r\n\n\u003ch3\u003eDry Carbon Fibre Construction\u003c\/h3\u003e\n\u003cp\u003eManufactured using a dry carbon process, chosen for its rigidity and the depth of its finish under direct light.\u003c\/p\u003e\r\n\n\u003ch3\u003eIntegrated LED Light\u003c\/h3\u003e\n\u003cp\u003eA centre-mounted LED element is built into the diffuser, in the style used on Audi Sport competition cars.\u003c\/p\u003e\r\n\n\u003ch3\u003eMulti Piece Kit\u003c\/h3\u003e\n\u003cp\u003eSupplied as the main diffuser plus a pair of side blades, so the treatment carries across the full width of the rear.\u003c\/p\u003e\r\n\n\u003ch3\u003eDeep Vertical Strakes\u003c\/h3\u003e\n\u003cp\u003eFull-depth fins run the width of the centre section for a far more purposeful rear than the standard valance.\u003c\/p\u003e\r\n\n\u003ch3\u003eHigh Gloss Twill Finish\u003c\/h3\u003e\n\u003cp\u003eA clear gloss finish over a consistent twill weave, matched to the look of factory Audi Sport carbon components.\u003c\/p\u003e\r\n\n\u003ch2\u003ePerformance Benefits\u003c\/h2\u003e\r\n\n\u003ch3\u003eTransformed Rear End\u003c\/h3\u003e\n\u003cp\u003eReplaces the largest plain surface at the back of the car, making it the most significant exterior change available at the rear.\u003c\/p\u003e\r\n\n\u003ch3\u003eImproved Aerodynamic Profile\u003c\/h3\u003e\n\u003cp\u003eDesigned to complement the aerodynamic profile of the car and help manage airflow around it.\u003c\/p\u003e\r\n\n\u003ch3\u003eLightweight Exterior Upgrade\u003c\/h3\u003e\n\u003cp\u003eCarbon fibre construction keeps the added mass minimal.\u003c\/p\u003e\r\n\n\u003ch3\u003eCompletes Your Carbon Fibre Build\u003c\/h3\u003e\n\u003cp\u003eMatches the weave and finish of the rest of the Proven Performance Parts Audi carbon range for a consistent exterior package.\u003c\/p\u003e\r\n\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\r\n\u003cp\u003eAudi B9.5 RS5 Coupe (2020+)\u003c\/p\u003e\r\n\u003cp\u003eAudi B9.5 RS5 Sportback (2020+)\u003c\/p\u003e\r\n\u003cp\u003eSelect your body style at checkout. The Coupe and Sportback are not interchangeable on this part.\u003c\/p\u003e\r\n\u003cp\u003eFor the facelifted B9.5 rear bumper. The pre-facelift B9 uses a different valance and is not covered.\u003c\/p\u003e\r\n\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\n\r\n\u003cp\u003eProfessional installation is strongly recommended.\u003c\/p\u003e\r\n\n\u003cp\u003eThe factory rear valance is removed. This is a replacement panel, not an overlay.\u003c\/p\u003e\r\n\n\u003cp\u003eThe LED element requires a 12V connection. Wiring into the vehicle loom should be carried out by an auto electrician.\u003c\/p\u003e\r\n\n\u003cp\u003eParking sensors, where fitted, are transferred from the original valance.\u003c\/p\u003e\r\n\n\u003cp\u003eMinor preparation, alignment or adjustment may be required during installation to achieve optimal fitment.\u003c\/p\u003e\r\n\n\u003cp\u003eDue to the nature of carbon-fibre manufacturing, slight variations in weave pattern may occur between products.\u003c\/p\u003e\r\n\n\u003ch2\u003eWhy Choose Proven Performance Parts\u003c\/h2\u003e\n\r\n\u003cp\u003eWe specialise in high-performance parts for European vehicles — including Volkswagen GTI \u0026amp; R models, Audi S\/RS platforms, and BMW M vehicles. Every product we offer is carefully selected for its quality, fitment, and real-world performance — tested by enthusiasts, for enthusiasts.\u003c\/p\u003e\r\n\r\n","brand":"Proven Performance Parts","offers":[{"title":"Audi B9.5 RS5 Coupe (2020+)","offer_id":52785739727130,"sku":null,"price":1845.0,"currency_code":"AUD","in_stock":true},{"title":"Audi B9.5 RS5 Sportback (2020+)","offer_id":52785739759898,"sku":null,"price":1845.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/1177\/4490\/files\/02_11cc6153-2e38-4a3b-b31f-7e93ad848a12.png?v=1788417626"},{"product_id":"audi-b9-5-rs5-carbon-fibre-bc-style-rear-diffuser","title":"Audi B9.5, RS5 Carbon Fibre BC Style Rear Diffuser","description":"\u003ch2\u003eAudi B9.5, RS5 Carbon Fibre BC Style Rear Diffuser\u003c\/h2\u003e\r\n\n\u003cp\u003eSharpen the rear of your RS5 with the BC Style Carbon Fibre Rear Diffuser, a single-piece replacement valance with four centre strakes and tall wrap-around outer sections that rise into the rear quarters.\u003c\/p\u003e\r\n\n\u003cp\u003eManufactured from carbon fibre with a high-gloss twill finish, it fits in place of the factory valance on the original mounting points. The outer sections carry the carbon further up the bumper than most diffusers, so the rear reads as one continuous treatment rather than a strip along the bottom.\u003c\/p\u003e\r\n\n\u003cp\u003eIt suits an owner who wants a substantial rear change in one part, and it is the more restrained of the two RS5 diffuser styles we carry.\u003c\/p\u003e\r\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\r\n\n\u003ch3\u003eDry Carbon Fibre Construction\u003c\/h3\u003e\n\u003cp\u003eManufactured using a dry carbon process, chosen for its rigidity and the depth of its finish under direct light.\u003c\/p\u003e\r\n\n\u003ch3\u003eWrap Around Outer Sections\u003c\/h3\u003e\n\u003cp\u003eTall outer sections rise into the rear quarters, carrying the carbon well above the base of the bumper.\u003c\/p\u003e\r\n\n\u003ch3\u003eFour Centre Strakes\u003c\/h3\u003e\n\u003cp\u003eVertical fins across the centre section give depth and shadow to the lower rear.\u003c\/p\u003e\r\n\n\u003ch3\u003ePre-Drilled Mounting Points\u003c\/h3\u003e\n\u003cp\u003eMounting tabs are formed into the moulding at the factory locations, so the part locates against the bumper without fabrication.\u003c\/p\u003e\r\n\n\u003ch3\u003eHigh Gloss Twill Finish\u003c\/h3\u003e\n\u003cp\u003eA clear gloss finish over a consistent twill weave, matched to the look of factory Audi Sport carbon components.\u003c\/p\u003e\r\n\n\u003ch2\u003ePerformance Benefits\u003c\/h2\u003e\r\n\n\u003ch3\u003eTransformed Rear End\u003c\/h3\u003e\n\u003cp\u003eReplaces the full lower rear panel, changing the character of the back of the car in a single part.\u003c\/p\u003e\r\n\n\u003ch3\u003eImproved Aerodynamic Profile\u003c\/h3\u003e\n\u003cp\u003eDesigned to complement the aerodynamic profile of the car and help manage airflow around it.\u003c\/p\u003e\r\n\n\u003ch3\u003eLightweight Exterior Upgrade\u003c\/h3\u003e\n\u003cp\u003eCarbon fibre construction keeps the added mass minimal.\u003c\/p\u003e\r\n\n\u003ch3\u003eCompletes Your Carbon Fibre Build\u003c\/h3\u003e\n\u003cp\u003eMatches the weave and finish of the rest of the Proven Performance Parts Audi carbon range for a consistent exterior package.\u003c\/p\u003e\r\n\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\r\n\u003cp\u003eAudi B9.5 RS5 Coupe (2020+)\u003c\/p\u003e\r\n\u003cp\u003eAudi B9.5 RS5 Sportback (2020+)\u003c\/p\u003e\r\n\u003cp\u003eSelect your body style at checkout. The Coupe and Sportback are not interchangeable on this part.\u003c\/p\u003e\r\n\u003cp\u003eFor the facelifted B9.5 rear bumper. The pre-facelift B9 uses a different valance and is not covered.\u003c\/p\u003e\r\n\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\n\r\n\u003cp\u003eProfessional installation is strongly recommended.\u003c\/p\u003e\r\n\n\u003cp\u003eThe factory rear valance is removed. This is a replacement panel, not an overlay.\u003c\/p\u003e\r\n\n\u003cp\u003eParking sensors, where fitted, are transferred from the original valance.\u003c\/p\u003e\r\n\n\u003cp\u003eMinor preparation, alignment or adjustment may be required during installation to achieve optimal fitment.\u003c\/p\u003e\r\n\n\u003cp\u003eDue to the nature of carbon-fibre manufacturing, slight variations in weave pattern may occur between products.\u003c\/p\u003e\r\n\n\u003ch2\u003eWhy Choose Proven Performance Parts\u003c\/h2\u003e\n\r\n\u003cp\u003eWe specialise in high-performance parts for European vehicles — including Volkswagen GTI \u0026amp; R models, Audi S\/RS platforms, and BMW M vehicles. Every product we offer is carefully selected for its quality, fitment, and real-world performance — tested by enthusiasts, for enthusiasts.\u003c\/p\u003e\r\n\r\n","brand":"Proven Performance Parts","offers":[{"title":"Audi B9.5 RS5 Coupe (2020+)","offer_id":52785739858202,"sku":null,"price":1390.0,"currency_code":"AUD","in_stock":true},{"title":"Audi B9.5 RS5 Sportback (2020+)","offer_id":52785739890970,"sku":null,"price":1390.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/1177\/4490\/files\/01_f8b7094c-f154-49cb-a4b3-a1012db85b0e.png?v=1788506403"},{"product_id":"audi-b9-5-rs5-carbon-fibre-fd-style-front-lip","title":"Audi B9.5, RS5 Carbon Fibre FD Style Front Lip","description":"\u003ch2\u003eAudi B9.5, RS5 Carbon Fibre FD Style Front Lip\u003c\/h2\u003e\r\n\n\u003cp\u003eDrop the nose of your RS5 with the FD Style Carbon Fibre Front Lip, a full-width splitter supplied with a pair of bumper canards that mount to the outer corners.\u003c\/p\u003e\r\n\n\u003cp\u003eManufactured from carbon fibre with a high-gloss twill finish, the lip follows the lower edge of the RS5 bumper and extends forward to a defined leading edge. Three vertical supports run back to the bumper, and the separate canards add a second layer of detail at each corner.\u003c\/p\u003e\r\n\n\u003cp\u003eIt suits a build where the front is meant to look planted, and it is the deeper of the two RS5 lip styles we carry.\u003c\/p\u003e\r\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\r\n\n\u003ch3\u003eDry Carbon Fibre Construction\u003c\/h3\u003e\n\u003cp\u003eManufactured using a dry carbon process, chosen for its rigidity and the depth of its finish under direct light.\u003c\/p\u003e\r\n\n\u003ch3\u003eSupplied With Canards\u003c\/h3\u003e\n\u003cp\u003eA pair of bumper canards is included, mounting to the outer corners for a second layer of detail either side.\u003c\/p\u003e\r\n\n\u003ch3\u003eDeep Leading Edge\u003c\/h3\u003e\n\u003cp\u003eThe lip extends further forward than the factory splitter, giving the front a lower, more planted stance.\u003c\/p\u003e\r\n\n\u003ch3\u003ePre-Drilled Mounting Points\u003c\/h3\u003e\n\u003cp\u003eMounting tabs are formed into the moulding at the factory locations, so the part locates against the bumper without fabrication.\u003c\/p\u003e\r\n\n\u003ch3\u003eHigh Gloss Twill Finish\u003c\/h3\u003e\n\u003cp\u003eA clear gloss finish over a consistent twill weave, matched to the look of factory Audi Sport carbon components.\u003c\/p\u003e\r\n\n\u003ch2\u003ePerformance Benefits\u003c\/h2\u003e\r\n\n\u003ch3\u003eLowered Front Stance\u003c\/h3\u003e\n\u003cp\u003eVisually drops the nose of the car and sharpens the leading edge without altering ride height.\u003c\/p\u003e\r\n\n\u003ch3\u003eImproved Aerodynamic Profile\u003c\/h3\u003e\n\u003cp\u003eDesigned to complement the aerodynamic profile of the car and help manage airflow around it.\u003c\/p\u003e\r\n\n\u003ch3\u003eLightweight Exterior Upgrade\u003c\/h3\u003e\n\u003cp\u003eCarbon fibre construction keeps the added mass minimal.\u003c\/p\u003e\r\n\n\u003ch3\u003eCompletes Your Carbon Fibre Build\u003c\/h3\u003e\n\u003cp\u003eMatches the weave and finish of the rest of the Proven Performance Parts Audi carbon range for a consistent exterior package.\u003c\/p\u003e\r\n\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\r\n\u003cp\u003eAudi B9.5 RS5 Coupe (2020+)\u003c\/p\u003e\r\n\u003cp\u003eAudi B9.5 RS5 Sportback (2020+)\u003c\/p\u003e\r\n\u003cp\u003eDesigned for the RS5 front bumper. Vehicles fitted with the standard A5 or S5 bumper are not covered unless already converted to RS5 bodywork.\u003c\/p\u003e\r\n\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\n\r\n\u003cp\u003eProfessional installation is strongly recommended.\u003c\/p\u003e\r\n\n\u003cp\u003eThe canards mount separately to the bumper corners and require care to position symmetrically.\u003c\/p\u003e\r\n\n\u003cp\u003eGround clearance is reduced. Take care on steep driveways, speed humps and kerbs.\u003c\/p\u003e\r\n\n\u003cp\u003eMinor preparation, alignment or adjustment may be required during installation to achieve optimal fitment.\u003c\/p\u003e\r\n\n\u003cp\u003eDue to the nature of carbon-fibre manufacturing, slight variations in weave pattern may occur between products.\u003c\/p\u003e\r\n\n\u003ch2\u003eWhy Choose Proven Performance Parts\u003c\/h2\u003e\n\r\n\u003cp\u003eWe specialise in high-performance parts for European vehicles — including Volkswagen GTI \u0026amp; R models, Audi S\/RS platforms, and BMW M vehicles. Every product we offer is carefully selected for its quality, fitment, and real-world performance — tested by enthusiasts, for enthusiasts.\u003c\/p\u003e\r\n\r\n","brand":"Proven Performance Parts","offers":[{"title":"Audi B9.5 RS5 Coupe (2020+)","offer_id":52785740054810,"sku":null,"price":1495.0,"currency_code":"AUD","in_stock":true},{"title":"Audi B9.5 RS5 Sportback (2020+)","offer_id":52785740087578,"sku":null,"price":1495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/1177\/4490\/files\/01_27d10c70-2750-46ef-aa96-e6299d14cf84.png?v=1788417638"},{"product_id":"audi-b9-5-rs5-carbon-fibre-ae-style-front-lip","title":"Audi B9.5, RS5 Carbon Fibre AE Style Front Lip","description":"\u003ch2\u003eAudi B9.5, RS5 Carbon Fibre AE Style Front Lip\u003c\/h2\u003e\r\n\n\u003cp\u003eSharpen the front of your RS5 with the AE Style Carbon Fibre Front Lip, a single-piece splitter that runs the full width of the bumper and turns up into a winglet at each outer corner.\u003c\/p\u003e\r\n\n\u003cp\u003eManufactured from carbon fibre with a high-gloss twill finish, the lip locates along the lower edge of the RS5 bumper on the factory mounting points. Three vertical supports brace it back to the bumper, and the upswept corner winglets carry the line into the wheel arches.\u003c\/p\u003e\r\n\n\u003cp\u003eIt suits an owner after a cleaner front treatment than a canard-equipped splitter, and it pairs directly with the AE Style rear diffuser.\u003c\/p\u003e\r\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\r\n\n\u003ch3\u003eDry Carbon Fibre Construction\u003c\/h3\u003e\n\u003cp\u003eManufactured using a dry carbon process, chosen for its rigidity and the depth of its finish under direct light.\u003c\/p\u003e\r\n\n\u003ch3\u003eUpswept Corner Winglets\u003c\/h3\u003e\n\u003cp\u003eEach end turns up into a winglet that carries the line towards the wheel arch, framing the front of the car.\u003c\/p\u003e\r\n\n\u003ch3\u003eSingle Piece Construction\u003c\/h3\u003e\n\u003cp\u003eSupplied as one moulding rather than a three-piece kit, so there are no joins across the front of the car.\u003c\/p\u003e\r\n\n\u003ch3\u003ePre-Drilled Mounting Points\u003c\/h3\u003e\n\u003cp\u003eMounting tabs are formed into the moulding at the factory locations, so the part locates against the bumper without fabrication.\u003c\/p\u003e\r\n\n\u003ch3\u003eHigh Gloss Twill Finish\u003c\/h3\u003e\n\u003cp\u003eA clear gloss finish over a consistent twill weave, matched to the look of factory Audi Sport carbon components.\u003c\/p\u003e\r\n\n\u003ch2\u003ePerformance Benefits\u003c\/h2\u003e\r\n\n\u003ch3\u003eLowered Front Stance\u003c\/h3\u003e\n\u003cp\u003eVisually drops the nose of the car and sharpens the leading edge without altering ride height.\u003c\/p\u003e\r\n\n\u003ch3\u003eMatches the AE Rear Diffuser\u003c\/h3\u003e\n\u003cp\u003eDesigned alongside the AE Style rear diffuser, so the front and rear read as one kit.\u003c\/p\u003e\r\n\n\u003ch3\u003eLightweight Exterior Upgrade\u003c\/h3\u003e\n\u003cp\u003eCarbon fibre construction keeps the added mass minimal.\u003c\/p\u003e\r\n\n\u003ch3\u003eCompletes Your Carbon Fibre Build\u003c\/h3\u003e\n\u003cp\u003eMatches the weave and finish of the rest of the Proven Performance Parts Audi carbon range for a consistent exterior package.\u003c\/p\u003e\r\n\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\r\n\u003cp\u003eAudi B9.5 RS5 Coupe (2020+)\u003c\/p\u003e\r\n\u003cp\u003eAudi B9.5 RS5 Sportback (2020+)\u003c\/p\u003e\r\n\u003cp\u003eDesigned for the RS5 front bumper. Vehicles fitted with the standard A5 or S5 bumper are not covered unless already converted to RS5 bodywork.\u003c\/p\u003e\r\n\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\n\r\n\u003cp\u003eProfessional installation is strongly recommended.\u003c\/p\u003e\r\n\n\u003cp\u003eGround clearance is reduced. Take care on steep driveways, speed humps and kerbs.\u003c\/p\u003e\r\n\n\u003cp\u003eMinor preparation, alignment or adjustment may be required during installation to achieve optimal fitment.\u003c\/p\u003e\r\n\n\u003cp\u003eDue to the nature of carbon-fibre manufacturing, slight variations in weave pattern may occur between products.\u003c\/p\u003e\r\n\n\u003ch2\u003eWhy Choose Proven Performance Parts\u003c\/h2\u003e\n\r\n\u003cp\u003eWe specialise in high-performance parts for European vehicles — including Volkswagen GTI \u0026amp; R models, Audi S\/RS platforms, and BMW M vehicles. Every product we offer is carefully selected for its quality, fitment, and real-world performance — tested by enthusiasts, for enthusiasts.\u003c\/p\u003e\r\n\r\n","brand":"Proven Performance Parts","offers":[{"title":"Audi B9.5 RS5 Coupe (2020+)","offer_id":52785740316954,"sku":null,"price":1400.0,"currency_code":"AUD","in_stock":true},{"title":"Audi B9.5 RS5 Sportback (2020+)","offer_id":52785740382490,"sku":null,"price":1400.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/1177\/4490\/files\/01_470b8ba4-4d0c-4b7b-bf62-d8f19b30796f.png?v=1788506415"},{"product_id":"audi-b9-5-rs4-carbon-fibre-ae-style-front-lip","title":"Audi B9.5, RS4 Carbon Fibre AE Style Front Lip","description":"\u003ch2\u003eAudi B9.5, RS4 Carbon Fibre AE Style Front Lip\u003c\/h2\u003e\r\n\n\u003cp\u003eDrop the nose of your RS4 Avant with the AE Style Carbon Fibre Front Lip, a full-width splitter that follows the lower edge of the bumper and turns up into a winglet at each outer corner.\u003c\/p\u003e\r\n\n\u003cp\u003eManufactured from dry carbon fibre with a high-gloss twill finish, the lip is a single moulding that locates on the factory mounting points. Three vertical supports brace it back to the bumper, and the upswept corner winglets carry the line towards the wheel arches.\u003c\/p\u003e\r\n\n\u003cp\u003eIt is the most effective single change to the front of a B9.5 RS4, and it pairs with the matching AE Style parts across the range.\u003c\/p\u003e\r\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\r\n\n\u003ch3\u003eDry Carbon Fibre Construction\u003c\/h3\u003e\n\u003cp\u003eManufactured using a dry carbon process, chosen for its rigidity and the depth of its finish under direct light.\u003c\/p\u003e\r\n\n\u003ch3\u003eUpswept Corner Winglets\u003c\/h3\u003e\n\u003cp\u003eEach end turns up into a winglet that carries the line towards the wheel arch, framing the front of the car.\u003c\/p\u003e\r\n\n\u003ch3\u003eSingle Piece Construction\u003c\/h3\u003e\n\u003cp\u003eSupplied as one moulding rather than a multi-piece kit, so there are no joins across the front of the car.\u003c\/p\u003e\r\n\n\u003ch3\u003ePre-Drilled Mounting Points\u003c\/h3\u003e\n\u003cp\u003eMounting tabs are formed into the moulding at the factory locations, so the part locates against the bumper without fabrication.\u003c\/p\u003e\r\n\n\u003ch3\u003eHigh Gloss Twill Finish\u003c\/h3\u003e\n\u003cp\u003eA clear gloss finish over a consistent twill weave, matched to the look of factory Audi Sport carbon components.\u003c\/p\u003e\r\n\n\u003ch2\u003ePerformance Benefits\u003c\/h2\u003e\r\n\n\u003ch3\u003eLowered Front Stance\u003c\/h3\u003e\n\u003cp\u003eVisually drops the nose of the car and sharpens the leading edge without altering ride height.\u003c\/p\u003e\r\n\n\u003ch3\u003eImproved Aerodynamic Profile\u003c\/h3\u003e\n\u003cp\u003eDesigned to complement the aerodynamic profile of the car and help manage airflow around it.\u003c\/p\u003e\r\n\n\u003ch3\u003eLightweight Exterior Upgrade\u003c\/h3\u003e\n\u003cp\u003eCarbon fibre construction keeps the added mass minimal.\u003c\/p\u003e\r\n\n\u003ch3\u003eCompletes Your Carbon Fibre Build\u003c\/h3\u003e\n\u003cp\u003eMatches the weave and finish of the rest of the Proven Performance Parts Audi carbon range for a consistent exterior package.\u003c\/p\u003e\r\n\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\r\n\u003cp\u003eAudi B9.5 RS4 Avant (2020+)\u003c\/p\u003e\r\n\u003cp\u003eDesigned for the facelifted B9.5 RS4 front bumper. The pre-facelift B9 uses a different bumper and is not covered.\u003c\/p\u003e\r\n\u003cp\u003eThe standard A4 and S4 use a different bumper and are not covered.\u003c\/p\u003e\r\n\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\n\r\n\u003cp\u003eProfessional installation is strongly recommended.\u003c\/p\u003e\r\n\n\u003cp\u003eGround clearance is reduced. Take care on steep driveways, speed humps and kerbs.\u003c\/p\u003e\r\n\n\u003cp\u003eMinor preparation, alignment or adjustment may be required during installation to achieve optimal fitment.\u003c\/p\u003e\r\n\n\u003cp\u003eDue to the nature of carbon-fibre manufacturing, slight variations in weave pattern may occur between products.\u003c\/p\u003e\r\n\n\u003ch2\u003eWhy Choose Proven Performance Parts\u003c\/h2\u003e\n\r\n\u003cp\u003eWe specialise in high-performance parts for European vehicles — including Volkswagen GTI \u0026amp; R models, Audi S\/RS platforms, and BMW M vehicles. Every product we offer is carefully selected for its quality, fitment, and real-world performance — tested by enthusiasts, for enthusiasts.\u003c\/p\u003e\r\n\r\n","brand":"Proven Performance Parts","offers":[{"title":"Audi B9.5 RS4 Avant (2020+)","offer_id":52787524895002,"sku":null,"price":1300.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/1177\/4490\/files\/04_4be971dd-f77f-4450-870f-67efd26733fd.png?v=1788424128"},{"product_id":"audi-b9-rs4-rs5-carbon-fibre-mirror-caps","title":"Audi B9, RS4\/RS5 Carbon Fibre Mirror Caps","description":"\u003ch2\u003eAudi B9, RS4\/RS5 Carbon Fibre Mirror Caps\u003c\/h2\u003e\n\u003cp\u003eReplace the painted mirror housings on your RS4 or RS5 with these Carbon Fibre Mirror Caps, a pair of full replacement covers moulded to the exact profile of the factory item.\u003c\/p\u003e\n\u003cp\u003eManufactured from dry carbon fibre with a high-gloss twill finish, each cap clips onto the existing mirror body in place of the standard cover. Because they replace the housing rather than sticking over it, there is no added thickness, no visible edge and no adhesive to fail.\u003c\/p\u003e\n\u003cp\u003eMirror caps are the detail that makes a carbon build read as deliberate rather than partial — they sit at eye level from the side of the car and are visible from the driver’s seat.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003ch3\u003eDry Carbon Fibre Construction\u003c\/h3\u003e\n\u003cp\u003eManufactured using a dry carbon process, chosen for the consistency of its finish across a small part seen at close range.\u003c\/p\u003e\n\u003ch3\u003eFull Replacement, Not a Cover\u003c\/h3\u003e\n\u003cp\u003eThese replace the factory mirror housing rather than sitting over it, so the profile stays exactly as Audi intended.\u003c\/p\u003e\n\u003ch3\u003eSupplied as a Pair\u003c\/h3\u003e\n\u003cp\u003eLeft and right caps are supplied together, moulded as mirrored parts so both sides match in weave and finish.\u003c\/p\u003e\n\u003ch3\u003eDirect Clip Fitment\u003c\/h3\u003e\n\u003cp\u003eLocates on the factory mounting clips. No adhesive and no drilling.\u003c\/p\u003e\n\u003ch3\u003eHigh Gloss Twill Finish\u003c\/h3\u003e\n\u003cp\u003eA clear gloss finish over a consistent twill weave, matched to the look of factory Audi Sport carbon components.\u003c\/p\u003e\n\u003ch2\u003ePerformance Benefits\u003c\/h2\u003e\n\u003ch3\u003eVisible From Every Angle\u003c\/h3\u003e\n\u003cp\u003eMirror caps sit at eye level from the side of the car and in the driver’s line of sight, so they read at a glance where a diffuser does not.\u003c\/p\u003e\n\u003ch3\u003eCompletes the Exterior Package\u003c\/h3\u003e\n\u003cp\u003eThe detail that ties a front lip, side skirts and rear diffuser together into one coordinated build.\u003c\/p\u003e\n\u003ch3\u003eLightweight Exterior Upgrade\u003c\/h3\u003e\n\u003cp\u003eCarbon fibre construction keeps the added mass negligible.\u003c\/p\u003e\n\u003ch3\u003eStraightforward Fitment\u003c\/h3\u003e\n\u003cp\u003eA clip-on replacement with no adhesive, so it is among the easiest carbon upgrades to fit and to reverse.\u003c\/p\u003e\n\u003ch2\u003eVehicle Fitment\u003c\/h2\u003e\n\u003cp\u003eAudi B9\/B9.5 RS4 (2017+)\u003c\/p\u003e\n\u003cp\u003eAudi B9\/B9.5 RS5 (2017+)\u003c\/p\u003e\n\u003ch2\u003ePlease Note\u003c\/h2\u003e\n\u003cp\u003eProfessional installation is strongly recommended.\u003c\/p\u003e\n\u003cp\u003eThe factory mirror cover is unclipped and removed. Take care not to break the retaining clips during removal.\u003c\/p\u003e\n\u003cp\u003eAny side assist or blind spot indicator in the housing is transferred from the original cover.\u003c\/p\u003e\n\u003cp\u003eMinor preparation or adjustment may be required during installation to achieve optimal fitment.\u003c\/p\u003e\n\u003cp\u003eDue to the nature of carbon-fibre manufacturing, slight variations in weave pattern may occur between products.\u003c\/p\u003e\n\u003ch2\u003eWhy Choose Proven Performance Parts\u003c\/h2\u003e\n\u003cp\u003eWe specialise in high-performance parts for European vehicles — including Volkswagen GTI \u0026amp; R models, Audi S\/RS platforms, and BMW M vehicles. Every product we offer is carefully selected for its quality, fitment, and real-world performance — tested by enthusiasts, for enthusiasts.\u003c\/p\u003e","brand":"Proven Performance Parts","offers":[{"title":"Audi B9\/B9.5 RS4 (2017+)","offer_id":52791728177434,"sku":null,"price":595.0,"currency_code":"AUD","in_stock":true},{"title":"Audi B9\/B9.5 RS5 (2017+)","offer_id":52791728210202,"sku":null,"price":595.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0951\/1177\/4490\/files\/01_c14f59d4-bc1c-4887-95f7-072a7c00aef5.png?v=1788506487"}],"url":"https:\/\/provenperformanceparts.com.au\/collections\/b9-b9-5-rs4-rs5-accessories.oembed","provider":"Proven Performance Parts","version":"1.0","type":"link"}